| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER ON THE RIGHT SIDE TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
REMOVE THE 4 SCREWS HOLDING THE UPPER VAC HOUSING.
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE UPPER VAC HOUSING UP TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 8 |
|
LOOSEN THE 2 SCREWS HOLDING THE GUIDE HOUSING.
| Screwdriver-phillips |
|
|
| 9 |
|
PULL UP ON THE TOP OF THE UPPER VAC HOUSING TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 10 |
|
LOCATE THE TERMINAL BLOCK ON THE BOTTOM OF THE MIDDLE VAC HOUSING. LOOSEN THE SCREWS AND PULL TO REMOVE THE WIRES. REMOVE THE TERMINAL BLOCK SCREW. PULL TERMINAL BLOCK FROM MACHINE.
| Screwdriver-flat tip |
|
| Screwdriver-phillips |
|
|
| 11 |
|
REVERSE STEPS 1 THRU 10 TO INSTALL A NEW TERMINAL BLOCK AND TO REASSEMBLE THE MACHINE.
|